Skip to main content

Press Releases

Average Spectral Difference enables objective comparisons of naturalness between light sources

FREMONT, California – May 14, 2020 – Bridgelux today announced development of a new metric to enable objective comparisons of light sources to natural light.  With the growing market interest in human-centric lighting, the question of “naturalness” of light source spectra is becoming a frequently asked question.  Standard lighting quality metrics such as CRI and TM-30 do not fully address the naturalness question.  The Average Spectral Difference (ASD) metric has been developed by Bridgelux to address this shortcoming in available light quality metrics.

Throughout evolution, the human visual system has evolved under the natural light of sun and fire.  These light sources have standardized industry spectral power definitions that describe the state of natural light.  Lighting specifiers, designers, and luminaire manufacturers regularly consider color quality metrics such as CRI and TM-30, as well as individual spectral power distributions (SPDs), when making decisions regarding light source selection.  However, until now, there has been no metric that quantifies the naturalness of a light source.  ASD provides an objective measurement of how closely a light source matches natural light over the visible spectrum, averaging the differences of the spectral peaks and valleys between a light source and a standardized natural light source of the same CCT.  The ASD value is a quantitative metric of the SPD differences shown in the figure below.

Unlike CRI and TM-30, where higher values indicate higher quality light, ASD represents the difference in spectra compared to natural light, therefore the lower the ASD value, the closer the match to natural light.  The Bridgelux ThriveTM LED light source family has been engineered to provide the closest match to natural light available in the market.  The graph above and table below compares standard 80, 90, and 98 CRI light sources with Thrive at 3000K.  The ASD values for standard light sources are much larger compared to Thrive, including that of the 98 CRI light source.  While TM-30 and CRI are important color quality metrics, having high values does not necessarily correspond to high naturalness of the light source, whereas having very low ASD values always corresponds to high naturalness.

 

   

“The market is evolving to human-centric lighting,” said Brian Cumpston, VP Solutions Development of Bridgelux.  “While there are several approaches to developing human-centric lighting solutions, delivering the closest match to natural light is of great interest to our customers.  Thrive has been developed to address this demand, and the new ASD metric developed by Bridgelux provides an objective and quantitative way to compare light sources and determine how closely they match the spectra of natural light.  We hope this new metric will be broadly adopted in the lighting industry to provide new insight into naturalness beyond CRI and TM-30.”

 

Bridgelux has authored a white paper further explaining the background behind the ASD metric which is now available for download from the Bridgelux web site. 

For more information, please visit https://www.bridgelux.com or email pr@bridgelux.com.

Contact: pr@bridgelux.com

Website: https://www.bridgelux.com/products/thrive

Logo: https://www.bridgelux.com/company/newsroom

Product photography: Available upon request to pr@bridgelux.com

About Bridgelux

Bridging Light and Life™

Bridgelux is a leading developer and manufacturer of lighting technologies and solutions that invites companies, industries and people to experience the power, possibility and financial potential of LED lighting. Born of world-class engineering and informed by human intuition, the company's products and solutions make it possible for its customers to provide high performance, human-centric influenced light for the commercial, industrial and outdoor markets. For more information about the company, please visit bridgelux.com.

Bridgelux, the Bridgelux stylized logo design, are registered trademarks of Bridgelux, Inc.  Bridging Light and Life, and Thrive are trademarks of Bridgelux, Inc.  All other trademarks are the property of their respective owners.

###

Innovation further increases energy efficiency and reduces the cost of light

FREMONT, California – March 12, 2020 – Bridgelux today announced its eighth generation of LED chip-on board (COB) products delivering up to 185 lm/W across its V SeriesTM, Vero® Series and Vero® SE Series product families at nominal drive current.  This performance is benchmarked at the popular 3000K 80 CRI color point, with efficacies above 200 lm/W possible at other color points across the industry’s broadest range of COB products.

In addition to reclaiming the industry lead in COB efficacy, these products have many additional features:

  • Nominal light output optimized to align with traditional lamp standards
  • Industry best standard warranty of up to 10 years
  • Efficacy improvements of up to 10% compared to previous product generations
  • Up to 3x overdrive capability, delivering a 30% increase in maximum lumens per LES size
  • Increased lumens per dollar, further reducing the cost of solid-state lighting
  • Optical and mechanical consistency with previous generations, enabling a seamless upgrade path leveraging existing ecosystem components
  • Broad range of COB size and performance options from LES 8mm to LES 29mm
  • Improved alignment with industry standard drive currents, enabling the use of economical LED drivers to further reduce costs
  • Technologically equivalent with current Bridgelux seventh generation COB LM-80 data

With more efficient light sources available for an entire lighting ecosystem, customers are now better equipped to meet evolving energy standards and rebate incentive programs without compromises in quality of light.

In addition to the announcement of new Gen 8 products, Bridgelux continues to expand its portfolio of human centric lighting solutions.  New products under development include the new Vesta® ThriveTM COB, the industry’s first tunable white natural spectrum light source; expansions in the Vesta® Flex dual channel driver and controls family to now include Casambi and Silvair control modules; and the new Vesta® SE, the first dim-to-warm and tunable white COBs with integrated holders to simplify and standardize mechanical, optical, and electrical connections.

“The lighting market continues to evolve, with some suppliers reducing their focus on lighting,” said Tim Lester, CEO of Bridgelux.  “Bridgelux is a technology partner for our customers that remains committed to lighting.  Our expanded portfolio further enhances our ability to support our customers in navigating the market transition toward human centric lighting, the right light, in the right place, at the right time.  We look forward to working with our customers to expand their product portfolios, ensuring innovative, market leading, lighting products.”

Bridgelux Gen 8 products are now available for sampling and ordering with production shipments commencing in April 2020.

For more information, please visit https://www.bridgelux.com or email pr@bridgelux.com.

Contact: pr@bridgelux.com

Website: https://www.bridgelux.com/products/v-series

    https://www.bridgelux.com/products/vero-series

    https://www.bridgelux.com/products/vero-se-series

  

Logo: https://www.bridgelux.com/company/newsroom

Product photography: Available upon request to pr@bridgelux.com

About Bridgelux

Bridging Light and Life™

Bridgelux is a leading developer and manufacturer of lighting technologies and solutions that invites companies, industries and people to experience the power, possibility and financial potential of LED lighting. Born of world-class engineering and informed by human intuition, the company's products and solutions make it possible for its customers to provide high performance, human-centric influenced light for the commercial, industrial and outdoor markets. For more information about the company, please visit bridgelux.com.

Bridgelux, the Bridgelux stylized logo design, V Series, Vesta, Vero, and Thrive are registered trademarks of Bridgelux, Inc.  Bridging Light and Life is a trademark of Bridgelux, Inc.  All other trademarks are the property of their respective owners.

###

 

 

New human centric lighting options help customers navigate the next phase of LED lighting

Fremont, California – October 10, 2019 – Enabling LED industry transformation for over 15 years, Bridgelux today reinforced its focus and commitment to the lighting market with the commercial availability of Thrive™ surface mount device (SMD) 2835 and V Series™ chip-on-board (COB) parts.  Thrive white point options are designed to closely match the spectra of natural light by reducing blue spikes and cyan valleys, and providing full spectrum, human centric LED lighting solutions.

The loss of natural light benefits affects those who spend most of their time indoors, with office workers being one of the groups especially at risk.  According to Harvard Business Review, the “health benefits of access to natural light are causing some firms to re-imagine their workspace and tout this as a recruiting tool.”1  The lighting industry is moving beyond the efficacy race and towards human centric lighting solutions incorporating circadian elements that may impact well-being for anyone spending extended periods of time indoors.

First announced in March 2019, Thrive uses proprietary chip, phosphor and packaging technologies to deliver a close spectral match to natural light.  The high-fidelity spectral output of Thrive creates stunning environments with excellent color rendering and outstanding TM-30 metrics.  Unlike other high CRI light sources, Thrive has been engineered specifically to provide a close and continuous match to natural light across the visible wavelength range to enable the next wave of innovation in the lighting market: human centric lighting. 

Thrive SMD 2835 1W 9V and V10C are now available for ordering.  Additional SMD 2835 and V Series form factors will be available in late Q4 and early Q1 2020.

“Today’s announcement reflects our pledge to customers to deliver a clear path toward flexible, interoperable solutions to meet lighting requirements that demand natural-looking light, particularly projects in the office, education, healthcare, residential and retail markets,” said Dr. Brian Cumpston, Vice President of Solutions Development at Bridgelux.  “We are a technology partner committed to delivering new LED light source solutions as our roadmap evolves, including an expansion of Thrive white options onto our Vesta® Series and EB Series™ tunable white light sources, and the expanding family of high efficacy SMD products.”

Bridgelux also announced performance upgrades to its SMD 2835 delivering up to 221 lumens/watt (lm/W), and to its SMD 4014, now delivering up to 190 lm/W, both in 4000K 80 CRI with a variety of 80 and 90 CRI color point options available.  These highly efficient light sources are useful for a range of lighting applications including office, retail, residential and architectural lighting, further assisting customers to meet ever evolving regulatory based efficacy requirements. 

SMD 2835 (21M-3DA) and 4014 (11L-3C) are immediately available for ordering.

 

1.  Source: “The #1 Office Perk?  Natural Light” Jeanne C. Meister.  September 3, 2018. https://hbr.org/2018/09/the-1-office-perk-natural-light

About Bridgelux

Bridging Light and Life™.  Bridgelux is a leading developer and manufacturer of light source, control and driver solutions that allow companies, industries and people to experience the power and possibility of LED lighting.  The company's solutions deliver high quality of light for the commercial, industrial and outdoor markets. For more information, please visit https://bridgelux.com/

Bridgelux, the Bridgelux stylized logo design, Vero and Vesta are registered trademarks of Bridgelux, Inc.   Bridging Light and Life, Thrive, and V Series are trademarks of Bridgelux, Inc.  All other trademarks are the property of their respective owners.

###

 

 

 

Fremont, California – September 3, 2019 – Bridgelux is excited to announce the appointment of Jason Posselt as Vice President of Global Marketing.  Mr. Posselt joins Bridgelux most recently from Intematix.  While at Intematix, he was responsible for leading both marketing and business development activities.  Prior to Intematix, Mr. Posselt held marketing positions at Bridgelux and Philips Lumileds, and product development roles within Hewlett-Packard.

“We are happy to welcome Jason back to the Bridgelux family.  His years of experience working within the lighting industry are invaluable as we continue to develop the marketing function and expand into new markets.  Jason’s ability to foresee trends makes him the ideal leader to bolster the Bridgelux commitment to lighting and the promise of flexible, human-centric lighting solutions,” said Tim Lester, CEO of Bridgelux.

Mr. Posselt began his career focused on developing the first high power LEDs targeted for specialty and general lighting.  Over his career, he held multiple commercial roles in solid state lighting including the areas of product marketing, market development, business segment and marketing management.   Mr. Posselt is now tasked at Bridgelux with leading the overall marketing function, including product management and strategy, corporate positioning and sales enablement in partnership with the global sales teams.

Mr. Posselt is based in Fremont, California.  He received a bachelor’s degree in mechanical engineering from the University of Southern California and a master’s degree in mechanical engineering from the University of California, Berkeley.

For additional information, please contact pr@bridgelux.com.

About Bridgelux

Bridging Light and Life™.  Bridgelux is a leading developer and manufacturer of light source, control and driver solutions that allow companies, industries and people to experience the power and possibility of LED lighting.  The company's solutions deliver high quality of light for the commercial, industrial and outdoor markets. For more information, please visit bridgelux.com.

Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc.  Bridging Light and Life is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.

###

 

Dedicated service for customized lighting projects now available in areas of central Europe

FREMONT, California – July 16, 2019 – Bridgelux today announced a global agreement with Neumüller Elektronick (Neumüller) for the distribution of its low power, packaged and module products in Germany, Austria, Switzerland and Poland.

The expertise of Neumüller to help customers move completely through their project cycle from idea to production means Bridgelux customers will receive customized, future proof solutions for their regional projects.

For over 15 years, Bridgelux has transformed the lighting industry by designing solutions to help companies, industries and people experience the power and possibility of light.  With the agility of a vertically integrated organization, Bridgelux offers the industry’s first 10-year LED light source warranty, ultra-high CRI array products, and a world-class application services team.

“We are very excited to work with Neumüller, a company that shares our values of providing confidence and reliability throughout the entire customer experience,” said Mark van den Berg, Vice President of Sales at Bridgelux.  “Customers in central Europe will benefit from the expertise of Neumüller as they work on projects that have custom design-in requirements.”

Based in Germany, Neumüller is a family owned distributor of electronic components and systems to help customers from inception to design-in.  For over 65 years, Neumüller has worked hand in with customers with passion and dependability throughout the entire design-in process.

For more information about Neumüller and Bridgelux, please visit the following webpages:

 

Product photography: Available upon request to pr@bridgelux.com

 

 

About Bridgelux

Bridging Light and Life™.  Bridgelux is a leading developer and manufacturer of lighting technologies and solutions that invites companies, industries and people to experience the power, possibility and financial potential of LED lighting. Born of world-class engineering and informed by human intuition, the company's products and solutions make it possible for its customers to provide high performance, human-centric influenced light for the commercial, industrial and outdoor markets. For more information, please visit bridgelux.com.

Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc.   Bridging Light and Life is a trademark of Bridgelux, Inc.  All other trademarks are the property of their respective owners.

###

 

 

EB Series LED products now available with expanded color point options and new form factors

FREMONT, California – July 9, 2019 – Bridgelux today announced an expansion of its EB Series™ LED product family to include increased efficacy of up to 200 lumens/watt (lm/W), new 2700K standard CCT options, new 90 CRI options, and new slim linear and square form factors.  As a customizable emitter-on-board platform using Bridgelux surface mount device (SMD) LEDs, EB Series offers customers choice in form factors, color points and CRI options tailored to their specific project.

Light is at the heart of life.  In today’s lighting market, customization and personalization are expectations, not trends.  Customers demand manufacturers build comprehensive solution platforms that offer choice in efficacy, form factor, color point and light quality. 

Bridgelux EB Series products now include third generation standard linear (280-, 560- and 1120 mm) and slim linear (340-, 590- and 1190 mm) lengths with typical efficacies of 200 lm/W and an expanded CCT range of 2700K – 5700K.  New 90 CRI options are also available for improved quality of light and enable luminaires to be in compliance with California’s Title 24 regulation.  New custom products include eight- and twelve-inch square form factors with increased lumen output ideal for many commercial applications.

“Flexibility and customization are the foundation of today’s lighting solutions,” said Dr. Brian Cumpston, Vice President of Solutions at Bridgelux.  “We are excited to offer customers new form factors with 200lm/W efficacy to meet their increasingly diverse needs, and to be able to do so in a cost-effective manner.”

These EB Series products are now available for sampling and ordering as Gen 3, Slim Gen 3 and Square.

 

Product photography: Available upon request to pr@bridgelux.com

About Bridgelux

Bridging Light and Life™.  Bridgelux is a leading developer and manufacturer of lighting technologies and solutions that invites companies, industries and people to experience the power, possibility and financial potential of LED lighting. Born of world-class engineering and informed by human intuition, the company's products and solutions make it possible for its customers to provide high performance, human-centric influenced light for the commercial, industrial and outdoor markets. For more information, please visit bridgelux.com.

Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc.   Bridging Light and Life and EB Series are trademarks of Bridgelux, Inc.  All other trademarks are the property of their respective owners.

###

 

Subscribe to Press Releases